Line a 9x9-inch pan (or 9x13) with parchment paper and lightly dust with arrowroot powder or cornstarch.
Pour 1/2 cup cold water into the bowl of a stand mixer. Sprinkle gelatin evenly over the water and let bloom for 5–10 minutes.
In a small saucepan, combine honey, remaining 1/2 cup water, and salt. Heat over medium until the mixture reaches 240°F (soft ball stage) on a candy thermometer. This will take about 10-15 minutes.
With the mixer on low speed, carefully pour the hot honey mixture into the bloomed gelatin.
Increase speed to high and whip for 8–10 minutes, until thick, glossy, and tripled in volume.
Add vanilla extract and mix briefly to combine.
Immediately spread mixture into the prepared pan and smooth the top with a lightly greased spatula.
Let sit at room temperature for at least 4 hours or overnight, until fully set.
Dust the top with additional arrowroot or cornstarch, remove from pan, and cut into squares.
Notes
Use a candy thermometer. The honey syrup needs to reach 240°F for the marshmallows to set properly. A candy thermometer takes the guesswork out of this step.
Bloom the gelatin first. Allowing the gelatin to absorb the cold water before adding the hot syrup helps it dissolve evenly.
Whip until thick and fluffy. The marshmallow mixture should become glossy and increase significantly in volume. A stand mixer with a whisk attachment makes this easier.
Work quickly after whipping. Once the marshmallow mixture is ready, transfer it to the prepared pan right away. It will begin setting as it cools.
Grease your spatula. A lightly greased spatula makes it easier to spread the sticky mixture evenly.
Dust generously. Arrowroot powder or cornstarch helps keep the finished marshmallows from sticking together.
Allow plenty of setting time. Let the marshmallows rest undisturbed for at least 4 hours before cutting.
Storage: Store in an airtight container at room temperature up to 1 week. Do not refrigerate, as they can become sticky. To roast these marshmallows, cut them and then let them sit uncovered for a few days to allow them to dry out. They will melt faster than store-bought marshmallows, so heat them more gently, holding them at the edge of the fire rather than in the hottest part.FAQsDo I need a stand mixer?You can use a hand mixer, but just know that the whipping stage requires high speed for a long time for proper volume. If you use a hand mixer be sure it doesn’t overheat, and be prepared to hold it for a while!Can I use maple syrup instead of honey?Honey is recommended for structure and stability. Maple syrup may produce softer marshmallows, but it would still work.Why are my marshmallows sticky?Be generous with dusting powder and allow them to fully set before cutting.